Water Deadweight Tester, (1～100)MPa, 0.01%RD, Water, Tungsten Carbide PCU, 304SS mass set, metric connector with adapters
MODEL BL513 WATER MEDIA DEADWEIGHT TESTER
Oxygen gas is used in a large number of applications throughout the world. The aviation, medical and diving recreation industries use oxygen to enhance breathing while other industries use oxygen in applications such as welding. The use of oxygen poses many dangers and special care and handling need to be taken when using the pressure gauges, regulators and other equipment to keep them free from contaminants.
The model BL513 water deadweight testers are perfect solution for oil and grease free oxygen pressure gauge calibration and measurements.
KEY FEATURES
Water media
0.005%, 0.01%, 0.02%, 0.05% accuracy
Accuracy of low limit range keeps same as upper limit range
All wetted pats, specially pressure connections are rinsed with an extractant
All valves and fittings are cleaned for residual hydrocarbon determination
High quality needle valves provide optimum control and sealing
Any accessories are also cleaned and inspected, usually through an ultrasonic method immersed in the solvent.
APPLICATION
Calibrationof oil grease free pressure gage
Chemical, pharmaceutical, aviation industry
PRESSURE SELECTABLE SHEET
Part #
Range
Accuracy
Area
Mass
KYS25
(0.5~25)MPa
0.05, 0.02, 0.01
0.1 cm2
25 kg
KYS60
(1~60) MPa
0.05, 0.02, 0.01
0.05 cm2
30 kg
KYS70
(1~70) MPa
0.05, 0.02, 0.01
0.05 cm2
35 kg
KYS100
(1~100)MPa
0.05, 0.02, 0.01
0.05 cm2
50 kg
SPECIFICATION
Accuracy: 0.05%, 0.02%, 0.01%, 0.005% (customize)
Piston material: Tungsten carbide
Cylinder material: Tungsten carbide
Mass material: 304 stainless steel
Hydraulic base material: Stainless steel
Seal material: Buna-N, Cu Alloy
Medium: Deionized water
Gravity:Standard 9.80665 m/s², or customize local gravity.
Pressure units available: MPa, bar, psi (optional)
Pressure connector: Metric, (NPT and BSP is optional)
Base dimension: 225 mm (H) x 455 mm (L) x 380 mm (D)
