Vacuum Deadweight Tester, (-0.1～0.1) MPa, 0.01%RD, Dry Air media, Tungsten Carbide PCU, 304SS mass set, metric connector with adapters
MODEL BL506 VACUUM PRESSURE DEADWEIGHT TESTER
With high precision accuracy, the BL506 vacuum pressure deadweight tester have dual vacuum and pressure modes. Pressure and vacuum application can be operated by hand pump or external gas supply. To guarantee an excellent metrology-logic characteristics, all pistons and cylinders are made of extreme hardness tungsten carbide, the pressure distortion (expansion) coefficient is negligible. The low friction coefficient provides minutes of turning with just a little swing of the masses.
FEATURES
0.005%, 0.01%, 0.02%, 0.05% accuracy
Accuracy of low limit range keeps same as upper limit range. (Traditional deadweight tester is only 10% of maximum range).
Pressure mode and vacuum mode can be switchable by PV selector
99.99% vacuum with electric pump
The piston and cylinder is tungsten carbide, which provides stability, durability, and low thermal coefficients and distortion.
External supply port for connection to the gas supply source or electric vacuum pump
Assembled two-stages air purifier on a molecule filter level
High quality needle valves provide optimum control and sealing
Build-in liquid gas separator
APPLICATION
Primary vacuum standard in lab
Reference vacuum measure on workshop
SPECIFICATION
Accuracy: 0.05%, 0.02%, 0.01%, 0.005%
Piston and cylinder material: Tungsten carbide
Mass material: 304 stainless steel
Tester base and pump material: Aluminium alloy
Seal material: Buna-N, FTM PTFE, Cu Alloy
Medium: Dry and clean air, or nitrogen
Pressure units available: MPa, bar, psi (optional)
Pressure connector: Metric, (NPT and BSP is optional)
Gravity:Standard 9.80665 m/s², or customize local gravity.
Tester basedimension: 50 cm (H) x 65 cm (L) x 50 cm (D)
